Technical data of Bat brand BL-1 |
specification in supply |
white powder |
K value |
59±1 |
content and quality fraction percentage of ethylacetate |
11±1 |
total volatilization%  |
1.2 |
white degree  |
80 |
heat stability,160°C,10min |
70 |
apparent density,g/ml |
0.45 |
after boult thing,%,0.45mm |
1.0 |
|
mechanism impurity |
total quality of black and yellow/100g |
40 |
total number of which/100g |
20 |
| Character |
General character of Bat brand BL-1:
1.It has low modeling temperature and low adhibiting capability of melt, besides it can be processed in low temperature and is easy to mold with good fluid.
2.It has in plasticity and good flexibility. It can reduce dosage of elasticizer, receive large amount of filling and improve capabilities such as erosion-resisting characte
ristics and transparency of products.
3.It has good physical mechanism capability, electricity capability, good water-proof and good stability of size of products.
|
| Typical purpose |
Typical purpose of Bat brand BL-1 are as followings:
1.IC card basic material
2. plastic floor
3.finishing agent of surface
We will supply technology information to satisfy you according to customers requirements. |
| ? |
| Pigment,stabilizer and elasticizer. |
| BL-1 could mutually dissolve with most standard pigments. But we should also notice that the pigments containing zinc, cadmium and ferric oxide will accelerate the decomposition of BL-1 under high temperature (pay special attention to it when doing machining). Though BL-1 is able to bear hot and ultraviolet, the stability of BL-1should be enhanced in machining in some special circumstance. Usually epoxy compound stabilizer is a quite good heat-stabilizer of BL-1. When you are in need of higher heat-stability, we advise you to use organo-tin compounds with epoxy compound, for epoxy compound and organo-tin compound will engender cooperating effect. The most commonly used stabilizers include lead salt stabilizers. In addition, when producing outdoor products, you had better add in ultraviolet stabilizers with high lightfastness. The common solvent elasticizers include: phthalic acid ester, sebacic acid ester and phosphorus ester. |
| ? |
| Storage |
Store them under room temperature and in dry place (<25°C)Under these conditions, the life-span of the deposited products is no less than 12 months counted from the delivery date. If the storage period of the BL-1 colophony storage exceeds the storage life-span, this BL-1 colophony is not necessarily out of commission. But the user should supervise the performance of the BL-1 and products.
|
| Packaging |
| BL-1: 25 kg per pack, duplicated plastic polypropylene knit pack and plastic inner pack |
|
|
|
